Engineered for Vigilance. Defined by Reliability.

Our Retro-fit Oil Gauge Kit is the definitive solution for NC-platform owners seeking to safeguard their engine’s health without the risks associated with generic hardware. This RHD-specific kit provides a high-fidelity, dual-function 52mm readout for both Oil Pressure and Temperature, replacing the factory’s simulated gauges with real-time, sensor-driven data.

Structural Integrity: The Remote-Mount Advantage

A critical flaw in standard NC MZR/Duratec configurations is the use of oil-filter sandwich plates. It is a well-documented failure point: adding mass to the factory oil-filter bracket often leads to fatigue fractures, resulting in catastrophic oil pressure loss and immediate engine failure.

Our kit utilizes a Remote Sensor Design to eliminate this risk:

Isolation Mounting: The pressure sensor is relocated via a high-pressure hose, removing vibration-heavy mass from the engine block to extend sensor service life.
Direct Port Integration: The system taps directly into the factory oil-pressure-switch location, replacing the simple ON/OFF switch with a precision digital sender.
True Sump Sensing: We include a bespoke Sump-Plug Adapter, placing the temperature probe directly in the oil pan for the most accurate thermal readings available.

Data Transparency: Defeating the “Simulated” Gauge

From the factory, the NC instrument cluster features a “fake” oil pressure gauge that uses coolant temp and RPM to estimate pressure—a system that will not warn you of a failure until it is too late. Our kit restores Star Data Accuracy:

Live Monitoring: Track exact oil pressure values from cold-start to hot-idle, ensuring your pump and bearings are operating within spec.
Configurable Alerts: Powered by Innovate Motorsports technology, the gauge features a “Traffic Light” LED ring (Green/Amber/Red).
Pre-Programmed Logic: We ship the gauge pre-configured for the NC platform:
- Green (Optimal): 50°C – 80°C
- Amber (Operating): 81°C – 100°C
- Red (Warning): 101°C – 120°C
User Customization: Fully compatible with LM Programmer software via Windows for those who wish to fine-tune their own thermal thresholds.

Professional Cabin Integration

Designed specifically for Right-Hand Drive (RHD) vehicles, the kit maintains a clean, driver-focused cockpit:

Bespoke A-Pillar Pod: A custom-molded 52mm housing that offers a factory-integrated look while keeping critical data in your peripheral line of sight.
DIY-Friendly Installation: Engineered for the home mechanic, this kit requires only basic hand tools and bypasses the need for complex loom modifications.

What’s Included: The Definitive Kit List

Precision Sensing & Electronics

Innovate Motorsports 52mm Gauge: Dual-function digital display with programmable LED perimeter.
High-Accuracy Senders: Dedicated fluid pressure and temperature sensors.
Remote Pressure Line: Reinforced hose assembly for vibration-isolated sensor mounting.

Hardware & Adapters

Direct-Fit Sump Adapter: Replacement sump-plug with integrated sensor port.
Block-to-Remote Fitting: Application-specific adapter for the factory pressure-switch port.

Mounting & Aesthetics

RHD Specific A-Pillar Pod: 52mm single-gauge mount with OEM-matched texture.
Wiring Harness: Complete loom for power, ground, and sensor signal integration.

Pro-Tip: The Performance Viscosity Shift

To maximize the longevity of the NC 2.0L or 2.5L engine, we strongly recommend a 10W40 oil grade. While factory recommendations are often a compromise between emissions and protection, prioritizing a higher viscosity ensures a more robust oil film and superior bearing protection under performance driving conditions.

Installation Requirements

Tools Required: Basic socket set, spanners, and a Windows laptop (optional for custom programming).
Safety Warning: Ensure the engine is cold before removing the sump plug or factory pressure switch. Always verify leak-free connections at the remote hose before your first test drive.

NISSAN NAVARA D40 – FACELIFT FACTORY GRILL AMBER LEDS

Reviews

Related products

MAZDA MX-5 NC/MK3 – OIL PRESSURE & TEMPERATURE GAUGE KIT